:: BALAJI FIBER REINFORCE PVT. LTD. ::



	Inquiry \| Career with us \| Contact Us \| Site Map

: ISO 9001 : 2008 Certified Company : : ISO 14001 : 2004 Certified Company : : OHSAS 18001:2007 Certified Company : : SSI Certificate Certified Company : : NSIC Certified Company : : Tanks - Design Registration Receipt Certified Company : : RCF - Certificate of Registration Certified Company : : RCF Certified Company : : ICF Certified Company : : NSIC CRISIL Performance Certified Company : : NSIC CRISIL Certificate Certified Company : : TUV Certificate Certified Company : : VCCI Certified Company : : PLEPC Certified Company :

GRP Pipes & Fittings Water & Wastewater Treatment Plants Chemical & Process Equipments Components for Railway & Metros Terafil Water Filter Tank Rain Water Harvesting & Management Eco Smart Ventilators

"Welcome to Composite Village"

Jointing system of pipes and fittings

GRP Pipes Composition

Pipes Specification

Method of Mfg. GRP pipes and its process

Jointing system of pipes and fittings

Installation Manual

Restrained (Tensile Resistant)	Non –restrained
Flanged joint Butt and wrap joint	Bell and spigot Double bell coupling

FLANGED JOINT

To enable connections with steel & to allow for easy assembling & disassembling of process lines, GRP Pipes & Fittings can be supplied with flanges, drilled in accordance with ANSI, BS, DIN or other specification. Special requirement can be met upon request.

BUTT & WRAP JOINT

In general these joint will only be used for diameter over 100 mm. the preparation of this rigid joint requires good craftsmanship.

BELL & SPIGOT JOINT

The socket end of this joint is an integral filament wound part of the pipe. The spigot end is a machined part on which O-ring seal is positioned. The flexible joint allows for axial movement of the spigot in the socket & some permissible angular deflection.

DOUBLE BELL COUPLING

Short pipes are joined using double bell coupling. The sealing of the joint is achieved by the compression of two elastomeric rubber gaskets when the joint is assembled.

Note : Our Manufacturing unit is located at Poicha, Vadodara, Gujarat India. We do not have any branches in India or Abroad.